Filter
Top Products
5
(Optional) Assign IP Information to the Hub
The hub is designed to operate with little or
no user intervention. In most cases, you can
use it with its default settings.
Assign IP information to the FastHub 400M
model so that you can use the FastHub 400
series Hub Manager web-based interface
and so that the hub can communicate with
local routers and the intranet.
Contact your system administrator for the
hub IP information, and record it here.
Hub IP address:
Subnet mask:
Default gateway:
1
From the terminal or PC, enter Y:
Continue with configuration dialog? Y
2
Enter the IP address (for example:
10.1.105.20):
Enter IP address: 10.1.105.20
3
Enter the subnet mask (IP netmask)
(for example: 255.255.255.0):
Enter IP netmask: 255.255.255.0
4
Enter the IP address of the default
gateway (for example: 10.1.105.254):
Enter IP default gateway: 10.1.105.254
The following information is displayed:
The following configuration command
script was created:
ip address 10.1.105.20 255.255.255.0
ip default-gateway 10.1.105.254
!
end
5
Enter Y:
Use this configuration? Y
The following information is displayed:
Building configuration...
Use the enabled mode ‘configuration’
command to modify this configuration.
Press RETURN to get started.
6
Press Return.
7
Exit from the terminal session.
You can now display the FastHub 400 series
Hub Manager.