Filter
Top Products
A-21
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
Cross Connection
Minimum Cell Rate (cells/s) [raza_mcr]
MCR is the minimum cell rate, which is the minimum allocated bandwidth
for a connection.
W | P
Numb (10)
Range=0-214748
3647
0
Maximum Burst Size (cells) [raza_mbs]
MBS is the maximum number of cells that can be received at the PCR. This
allows a burst of cells to arrive at a rate higher than the SCR. If the burst is
larger than anticipated, the additional cells are either tagged or dropped.
This parameter applies only to VBR traffic.
W | P
Numb (10)
Range=0-214748
3647
0
CDVT (microseconds) [raza_cdvt]
Cell Delay Variation Tolerance establishes the time scale over which the
PCR is policed. This is set to allow for jitter (CDV).
W | P
Numb (10)
Range=0-214748
3647
0
Traffic Desc [raza_tdtype]
This is the traffic descriptor type which describes the specified traffic
parameters for the service (for more information consult the ATM Service
Application Solutions Guide).
M | W | P
Enum (7) "None"
"ABR_FC"
"ABR_NFC"
"CBR.1"
"UBR.1"
"UBR.2"
"VBR.1"
"VBR.2"
"VBR.3" "Other"
6400 NSP Specific
A to Z
Usage Parameter Control [c4az_upc]
This is the usage parameter control type.
W
Enum (4) pass,
tag, drop, none
Cast Type [c4az_cast]
This is the cast type.
W
Enum (9)
p2mp-leaf,
p2mp-root, p2p,
none
Z to A
Usage Parameter Control [c4za_upc]
This is the usage parameter control type.
W
Enum (4) pass,
tag, drop, none
Cast Type [c4za_cast]
This is the cast type.
W
Enum (9)
p2mp-leaf,
p2mp-root, p2p,
none
Table A-8 Cross Connection (continued)
Attributes Acceptable
Values
Default Values