Filter
Top Products
A-49
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
Appendix A Attribute Reference
Cross Connection Profile
Recovery Priority [srpriority]
This is the recovery priority for NNI resiliency.The lower the value, the
higher the priority; 0 having infinitely low priority, and 1 having the
highest priority.
M
Numb (10)
Range=0-214748364
7
0
UNI Recovery Priority [srunipriority]
This is the recovery priority for UNI resiliency. The lower the value,
the higher the priority; 0 having infinitely low priority, and 1 having the
highest priority.
W
Numb (10)
Range=0-214748364
7
0
Provider Service [srdestserv]
This is the Provider Service.
W
Text (32)
ATM Lport Associations
A Endpoint
Enable Frame Discard [raa_frdisc]
This attribute specifies whether to enable frame discard.
Bool (5)
Z Endpoint
Enable Frame Discard [raz_frdisc]
This attribute specifies whether to enable frame discard.
Bool (5)
ATM Attributes
Circuit Type [ratype]
This is the circuit type. It can be either a virtual circuit (VP) or virtual
path (VP).
Enum (2) "VC"
"VP"
Class of Service [raqos]
You can specify the class of service for ATM traffic. The class of
service determines which traffic descriptor you can select.
W
Enum (7) "CBR"
"ABR" "UBR"
"rt_VBR"
"nrt_VBR"
Fixed Round-Trip Time [ra_frtt]
This attribute specifies the round-trip time in milliseconds.
Numb (8)
Range=0-16700000
0
A to Z Direction
Bandwidth (kbits/s) [sraz_bandwidth]
This is the bandwidth consumed by the A endpoint for the AZ
direction.
M | W
Numb (10)
Range=0-214748364
7
Primary logical port [sra_primtp]
The original logical port that is being backed up by UNI resiliency
(nodename/portname).
Text (44)
Table A-25 Cross Connection Profile (continued)
Attributes Acceptable Values Default Values