6-10
Cisco Info Center Administrator Reference
78-5664-05
Chapter 6 Java Event List Configuration
Configuration with the JACE Editor
Copying a Configuration
An entire configuration can be copied, including all sets and properties, or just one part of a
configuration.
To copy a configuration:
1. Click on the configuration you want to copy. For example, click on jel1.
2. Click on the Copy button. The Copy Configuration window is displayed, as shown in Figure 6-4.
Figure 6-4 Copy a Configuration in JACE
3. Specify a name for the configuration. The copied configuration is displayed in the JACE display.
Deleting a Configuration
To delete a configuration:
1. Select the configuration from the JACE display.
2. Click on the Delete button. The configuration is removed from the JACE display.
Adding a Set to the Configuration
You can create additional sets in the configuration. To add a set:
1. Select the configuration from the JACE display.
2. Click on the Add button. The Add Set to Configuration window is displayed, as shown in Figure 6-5.
Figure 6-5 Add Set to Configuration in JACE
3.
Specify the name of the set. The set is displayed in the configuration in alphabetical order.
Deleting a Set
To delete a selected set and all the properties in it, do one of the following:
• Click the Delete button (shown in the left margin).
• Right click on the list to display the popup menu, then select Delete Set.
The set no longer appears in the JACE display.