Filter
Top Products
2-11
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter 2 Unpacking and Installing the Chassis
Unpacking the Router
Step 6 Use a Phillips screwdriver to unscrew the rear mounting flange from the system and rack.
Step 7 Use a Phillips screwdriver to unscrew the front mounting flange from the rack.
Step 8 Remove two bolts per hold-down bracket that secure the brackets to the pallet (Figure 2-7).
Figure 2-7 Hold-Down Brackets on the Cisco ASR 9922 Router Shipping Pallet
Note Do not unbolt the shipping rack from the pallet.
Step 9 Save the rear brackets and screws from the shipping packaging for reuse in rack mounting of the chassis
(Figure 2-8).
Note The two guide rails at the bottom of the rack come in the ASR-9922-ACC-KIT accessory kit.
302355