Filter
Top Products
FINAL DRAFT —Cisco Confidential
2-5
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 2 Bringing Up Cisco IOS XR Software on the Router
Verifying the System After Initial Boot
Examples of show Commands
The following sections provide examples of show commands:
• show version Command: Example, page 2-5
• show platform Command: Example, page 2-6
• show redundancy Command: Example, page 2-6
• show environment Command: Example, page 2-7
show version Command: Example
To view basic information about the router configuration, type the show version command in EXEC
mode, as shown in the following example:
RP/0/RSP0/CPU0:router# show version
Cisco IOS XR Software, Version 3.7.2.10I[FCI_DT_IMAGE]
Copyright (c) 2008 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 0.63(20081010:215422) [ASR9K ROMMON],
router uptime is 1 week, 1 day, 10 hours, 31 minutes
System image file is "bootflash:disk0/asr9k-os-mbi-3.7.2.10I/mbiasr9k-rp.vm"
cisco ASR9K Series (MPC8641D) processor with 4194304K bytes of memory.
MPC8641D processor at 1333MHz, Revision 2.2
40 GigabitEthernet/IEEE 802.3 interface(s)
2 Ethernet/IEEE 802.3 interface(s)
12 TenGigabitEthernet/IEEE 802.3 interface(s)
219k bytes of non-volatile configuration memory.
975M bytes of compact flash card.
33994M bytes of hard disk.
1605616k bytes of disk0: (Sector size 512 bytes).
1605616k bytes of disk1: (Sector size 512 bytes).
Step 5
show redundancy
Example:
RP/0/RSP0/CPU0:router# show redundancy
Displays the state of the primary (active) and standby (inactive)
RPs, including the ability of the standby to take control of the
system.
• If both RPs are working correctly, one node displays
active role, the Partner node row displays standby
role
, and the Standby node row displays Ready.
Step 6
show environment
Example:
RP/0/RSP0/CPU0:router# show environment
Displays information about the hardware attributes and status.
Command or Action Purpose