Filter
Top Products
12-27
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-21881-03
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Configuring Radio Management
Beginning in privileged EXEC mode, follow these steps to configure the WDS:
Configuring Radio Management
When you configure access points on your wireless LAN to use WDS, the access points automatically
play a role in radio management when they interact with the WDS device. To complete the radio
management configuration, you configure the WDS device to interact with the WLSE device on your
network.
Follow these steps to enable radio management on an access point configured as a WDS device:
Step 1 Browse to the Wireless Services Summary page. Figure 12-16 shows the Wireless Services Summary
page.
Figure 12-16 Wireless Services Summary Page
Step 4
sntp server server IP address Enter the name or ip address of the SNTP server.
Step 5
end Return to the privileged EXEC mode.
Step 6
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
Command Description
Command Description
Step 1
configure terminal Enter global configuration mode.
Step 2
dot11 ids mfp distributor Configures the WDS as an MFP distributor. When enabled, the
WDS manages signature keys, used to create the MIC IEs, and
securely transfers them between generators and detectors.
Step 3
end Return to the privileged EXEC mode.
Step 4
copy running-config
startup-config
(Optional) Save your entries in the configuration file.