30-17
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 30 Configuring the ASA CX Module
Configuring the ASA CX Module
What to Do Next
• (Optional) Configure the authentication proxy port. See the “(Optional) Configuring the
Authentication Proxy Port” section on page 30-17.
• Redirect traffic to the ASA CX module. See the “Redirecting Traffic to the ASA CX Module”
section on page 30-18.
(Optional) Configuring the Authentication Proxy Port
The default authentication port is 885. To change the authentication proxy port, perform the following
steps. For more information about the authentication proxy, see the “Information About Authentication
Proxy” section on page 30-5.
Guidelines
In multiple context mode, perform this procedure within each security context.
Detailed Steps
Command Purpose
cxsc auth-proxy port port
Example:
ciscoasa(config)# cxsc auth-proxy port 5000
Sets the authentication proxy port greater than 1024. The default
is 885.