Filter
Top Products
2-15
Cisco IOS XE Integrated Session Border Controller Configuration Guide for the Cisco ASR 1000 Series Aggregation Services Routers
OL-15421-01
Chapter 2 Configuring Integrated Session Border Controller
Cisco H.248 Profile
The termination ID structure is provisioned in the MGC. The MGC is at liberty to choose any termination
naming structure. The DBE can accept 3 to 9 fields in the termination ID structure.
The following H.248 sub-series transports are supported by the profile:
• Supported transports: TCP or UDP
• Segmentation supported: UDP: Optional
Use of the Interim Authentication Header defined in H.248.1v2 is optional within this profile.
Profile Packages
This section specifies the packages that are supported in this profile. Mandatory packages are packages
that are supported in the profile. Optional packages are packages that may be supported in the profile.
Table 2-2 shows the mandatory packages supported by the Cisco profile.
Table 2-3 shows the optional packages supported by the Cisco profile.
Context Attribute Descriptor No N/A
ContextIDList Parameter No N/A
AND/OR Context Attribute No N/A
Table 2-1 Context Attributes
Context Attribute Supported Values Supported
Ta b l e 2-2 Mandatory Packages
Package Name Package ID Version
Base Root root 2
Congestion Handling chp 1
DTMF Detection dd 1
DTMF Generation dg 1
Diffserv ds 1
Extended VPN Discrimination evpnd 1
Inactivity Timer it 1
Middlebox or EMP emp 1
NAT Traversal ntr 1
Network nt 1
RTP rtp 1
Traffic Management tman 1
Ta b l e 2-3 Optional Packages
Package Name Package ID Version Support Dependent On:
Address Reporting adr 1 Extension to ipnapt package
End-Point Statistics epstat 1