Filter
Top Products
www.cisco.com
Near end camera control
Using Touch Tones (DTMF) in a call
Near end camera presets
Tap More ...
During a call,
or outside a call, tap More ...
Tap Touch Tones ...
... then tap
Camera Control.
Adjust zoom and pan as required.
Tap Back to exit.
Far end camera control (in a call only)
Tap the name
along the bottom line ...
... then tap
Camera Control.
Adjust zoom and pan as required.
Tap Back to exit.
Tap an existing preset to make the camera move
accordingly. To dene presets, see “Adding a
near end camera preset” on page 6.
... then tap Camera Control.
Sometimes you may be urged to enter touch tones (DTMF) during a call, typically to reach extensions or to provide a pin code.
Use the touch tone keypad. Tap anywhere outside it to exit.
This works in point-to-point as well as in multisite calls, but only on systems with remotely controllable cameras.
24
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Contents
Contact us
Getting started
Placing calls
Using directories
In-call features
Settings
In-call features