Filter
Top Products
32
System > Port Setting
In the Port Setting page, the status of all ports can be monitored and
adjusted for optimum configuration. By selecting a range of ports
(From Port and To Port), the Speed and Flow Control can be set for
all such ports, by clicking Apply. To refresh the information table to
view the latest Link Status and Priority, press the Refresh button.
Figure 25 – System > Port Setting
Speed: Fiber connections can operate in Forced Mode settings
(1000M Full), Auto, or Disable. Copper
connections can operate in
Forced Mode settings (100M Full, 100M Half, 10M Full, 10M Half),
Auto, or Disable. The default setting for all ports is Auto.
NOTE: Be sure to adjust port speed settings appropriately after
changing connected cable media types .