Filter
Top Products
Normal Operations (AC Power Applied)
OL-30544-01 23
Normal Operations (AC Power Applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator Normal Operations
1
POWER On
2
DS On
3
US On
4
ONLINE On
5
ETHERNET 1-4
On - When a device is connected to an Ethernet port and no
data is being sent to or from the residential gateway
Blinks - When an Ethernet device is connected and data is
being transferred between the consumer premise equipment
(CPE) and the wireless home gateway
Off - When no devices are connected to the Ethernet ports
6
2.4G
Blinks - When the wireless access point is enabled and
operational
Fast Blinks -
When data is being transferred between the CPE
and the wireless home gateway
Off - When the wireless access point is disabled by the user
7
5G
Blinks - When the wireless access point is enabled and
operational
Fast Blinks -
When data is being transferred between the CPE
and the wireless home gateway
Off - When the wireless access point is disabled by the user
8
WPS
Off - When wireless setup is not active
Blinks - When wireless setup is active to add new wireless
clients on the wireless network
9
MoCA (Optional)
On - When MoCA devices are detected
Blinks - When MoCA data activity is present
Off - When no MoCA devices are detected
Note: In addition to the status shown in the previous table, some service providers
use color-coded LEDs to indicate detailed channel bonding and data link status. For
additional information about color-coded LEDs, check with your service provider.