Filter
Top Products
DS71-MD4 Serial host and 56k Modem
24
Select this option to add all ports to the user. The module displays the user with all ports added.
Remove All Ports
Select this option and the module displays the user with all ports deleted.
Local Modem Option
Ring to Answer
Select “Rings to Auto Answer” to set the number of rings before the unit answers. The module displays
the following: The default setting is 2.
Connectivity Timeout
Select the Connectivity Timeout option to set the continuous connectivity time (5 to 255 minutes) before
the modem automatically disconnects. Entering a time of 0 disables the Connectivity Timeout. The timer
starts when the modem answers (DCD goes high). The modem will disconnect, regardless of activity,
when time runs out. Default setting is 60 minutes. The module displays the following:
Inactivity Timeout
This option sets the time the modem will automatically disconnect, if there is no activity equaling the
programmed amount of time (1 to 120 minutes). Default setting is 0 (disabled).
Select Inactivity Timeout and the module display the following:
Assigned User Ports:
+----+----------* +-M3-+-M4-+-M5-+
|User| Name \|1234|1234|1234|
+----+------------*----+----+----+
| 2 | johnt |1234|1234|1234|
+----+------------*----+----+----+
Assigned User Ports:
+----+----------* +-M3-+-M4-+-M5-+
|User| Name \|1234|1234|1234|
+----+------------*----+----+----+
| 2 | johnt |....|....|....|
+----+------------*----+----+----+
Local Modem Option:
Rings to Answer .......................1
Connectivity Timeout ..................2
Inactivity Timeout ....................3
Exit ..................................X,CR
Enter Request :1
Rings to Auto Answer: 2
Enter number (1-4):
Modem Connectivity Timeout:60 minutes
Change It ? (Y/N) :