Filter
Top Products
Cisco IE 3000 Switch Getting Started Guide
2
Cisco IE 3000 Switch Getting Started Guide
OL-16234-01
For additional installation and configuration information for Cisco IE 3000
switches, see the Cisco IE 3000 documentation on Cisco.com. For system
requirements, important notes, limitations, open and resolved bugs, and
last-minute documentation updates, see the release notes, also on Cisco.com.
When you use the online publications, refer to the documents that match the Cisco
IOS software version running on the switch. The software version is on the Cisco
IOS label on the switch rear panel.
For translations of the warnings that appear in this publication, see the Regulatory
Compliance and Safety Information for the Cisco IE 3000 Switch that
accompanies this guide.
Taking Out What You Need
Follow these steps:
1. Unpack and remove the switch and the accessory kit from the shipping box.
2. Verify that you have received the items shown on page 3. If any item is
missing or damaged, contact your Cisco representative or reseller for
instructions.
3. Unpack and remove any optional expansion modules from their shipping
boxes.
4. Return the packing material to the shipping containers, and save it for future
use.
Note For information about using the switch with the optional PWR-IE3000-AC power
converter module, see the hardware installation guide on Cisco.com.
To rack-mount your switch, order the rack-mount adapter
(STK-RACKMNT-2955=). This is not part of the switch accessory kit.