Filter
Top Products
6 Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
Back Panel Descriptions
Mounting the Cisco ISA500 Series
Integrated Security Appliances
You can place your security appliance on a desktop, mount it on a wall, or
mount it in a rack.
Placement Tips
• Ambient Temperature: To prevent the security appliance from
overheating, do not operate it in an area that exceeds an ambient
temperature of 104°F (40°C).
•Air Flow: Be sure that there is adequate air flow around the security
appliance.
Feature Description
ANT01/ANT02 Threaded connectors for the antennas (for ISA550W and
ISA570W only).
USB Port Connects the unit to a USB device. You can use a USB
device to save and restore system configuration, or to
upgrade the firmware.
Configurable
Ports
Can be set to operate as WAN, LAN, or DMZ ports. The
ISA550 and ISA550W have 4 configurable ports. The
ISA570 and ISA570W have 5 configurable ports.
N
OTE Only one configurable port can be configured as a
WAN port at a time. Up to 4 configurable ports can be
configured as DMZ ports.
LAN Ports Connects PCs and other network appliances to the unit.The
ISA550 and ISA550W have 2 dedicated LAN ports. The
ISA570 and ISA570W have 4 dedicated LAN ports.
WAN Port Connects the unit to a DSL or cable modem, or other WAN
connectivity device.
RESET Button To reboot the unit, push and release the RESET button for
less than 3 seconds.
To restore the unit to its factory default settings, push and
hold the RESET button for a minimum of 3 seconds while
the unit is powered on. The POWER/SYS light will flash
green when the system is rebooting.
Power Switch Powers the unit on or off.
Power Connector Connects the unit to power using the supplied power cord
and adapter.
3