Filter
Top Products
5
Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis
78-18371-01
I/O Module Bays and HCA Expansion Cards
I/O Module Bays and HCA Expansion Cards
Within the Dell Modular Server Chassis unit, blade switches manage traffic to and from up to two HCA
IB mezzanine cards on the hosts. Each HCA IB mezzanine card adds two IB ports to a host. Each HCA
port connects through the unit mid-plane to a particular blade switch slot. The IB ports of the HCA card
that is seated in the HCA B location, connect to I/O module bays B1 and B2. The IB ports of the HCA
card that is seated in the HCA C location, connect to I/O module bays C1 and C2. See Figure 2 and
Table 1 for the location of the HCA cards and the corresponding I/O module bays.
For more details about the location of the HCA IB mezzanine card slots in the Dell Server Blade, see the
Dell PowerEdge M600 and M605 Hardware Owners Manual.
.
Figure 2 HCA Mezzanine Card Ports and Corresponding Switch I/O Module Bays
D
ell Server Blade
Chassis Rear - I/O Module Bays
B1 C1 C2 B2
185785
HCA C
HCA B
Port 2
Port 1
Port 1
Port 2
Table 1 HCA Mezzanine Card Ports and Corresponding Switch I/O Module Bays
HCA Mezzanine Card HCA InfiniBand Port
InfiniBand Switch I/O Module
Bay
B1 B1
2B2
C1 C1
2C2