Filter
Top Products
Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2001. Cisco Systems, Inc. All rights reserved.
78-12288-02
RSP4+ Bootflash Memory Upgrade to 16MB
Installation and Configuration Guide
Product Numbers: MEM-16F-RSP4+=
Customer Order Number: DOC-7812288=
Introduction
An 8 MB bootflash image is supplied with the RSP4+, RSP4, RSP2, RSP1 and RSP7000 on the Cisco
7500 series routers. This image is insufficient to store newer, larger Cisco IOS Releases, such as
12.1(4.4)T2 and 12.1(5)T, and future releases on the RSP4+. Use the instructions in this document to
upgrade to a 16-MB bootflash. Alternatively, you can use Cisco IOS Release 12.0(13)S rsp-boot-mz
image or other image, which is less than 7.7 MB in size. Contact the Technical Assistance Center (see
Technical Assistance Center, page 19) for more information on this latter alternative.
Note: The RSP8 has 16 MB of Flash memory and does not encounter this problem.
Objectives
The purpose of this document is to explain how to perform the following procedures:
• Remove the 8-MB SIMM and install a 16-MB SIMM
• Upgrade the bootflash memory image
Contents
This document includes the following sections:
• Related Documentation, page 2
• Installation Requirements, page 3
• Overview, page 9