Filter
Top Products
2-11
Cisco Media Gateway Manager User Guide
78-11705-02
Chapter 2 Installation
Configuring Cisco MGX 8000 Series Gateways
Note Uninstalling Cisco MGM does not uninstall WanCV and other CiscoView integration files that were
installed in Step 2 of the installation procedures. The following directory and files remain in your
CiscoView installation:
<CiscoView Root>/www/classpath/ems
<CiscoView Root>/www/classpath/cvpars.properties
<CiscoViewRoot>/www/classpath/com/cisco/nm/cvw/devpkgs/MGX8*.zip
<CiscoView Root>/htdocs/CmgmSessionTimeOut.html
Configuring Cisco MGX 8000 Series Gateways
For the Cisco MGM to communicate with Cisco MGX 8000 Series Carrier Voice Gateways, you must
initialize the following parameters for each chassis:
• Management IP address
• Site name
• Read-write community strings
For information about configuring Cisco MGX 8230 nodes, refer to the Cisco MGX 8230 Command Line
Interface Guide. For information about configuring Cisco MGX 8250 nodes, refer to the Cisco
MGX 8250 Command Line Interface Guide. For information about configuring Cisco MGX 8850 nodes,
refer to the Cisco MGX 8850 Command Line Interface Guide.
For detailed information about managing Cisco MGX 8000 Series gateways using CiscoView, refer to
CiscoView Documents on CCO, or refer to the following individual documents:
WAN CiscoView Release 3 for the MGX 8230
WAN CiscoView Release 3 for the MGX 8250
WAN CiscoView Release 3 for Release 1 of the MGX 8850
WAN CiscoView Release 3 for Release 2 of the MGX 8850