Filter
Top Products
2-4
Cisco Media Gateway Manager User Guide
78-11705-02
Chapter 2 Installation
System Requirements
Cisco MGM Software Requirements
Cisco MGM 2.0 requires the following software components:
• Cisco EMF Release 3.2 Patch 1.4
• Netscape 4.76 for Solaris (included and automatically installed with Cisco EMF 3.2)
• CiscoView 5.4
• WANCV package release 3.60 (included with Cisco MGM 2.0 package)
Note Solaris patch 108528-14 is required for critical performance improvement. Without installing this patch,
Cisco MGM will function. However, installation of 108528-14 will improve Cisco MGM performance
by approximately 70 percent.
Cisco MGX 8000 Series Software Requirements
Cisco MGM 2.0 manages Cisco MGX 8000 Series gateways based on the Cisco Processor Switch
Module (PXM1). Cisco MGM 2.0 also provides management of VISM, VISM-PR, RPM-PR, SRM, and
SRM-E cards. Table 2-2 shows the matrix of card software requirements for Cisco MGM 2.0.
Processor 2 x 450 MHz 4 x 440MHz 440 MHz
Swap space 4 GB
1
8 GB
1
2 GB
Monitor 17-inch color 17-inch color 17-inch color
Graphics card 24-bit 24-bit 24-bit
Power supply 1 2 (second power supply optional
for high availability installations)
1
Miscellaneous
Resources
Local or remote CD ROM
DAT tape backup
Local or remote CD ROM
DAT tape backup
Local or remote CD ROM
1. If CiscoView is running on the same system as Cisco MGM, you will need an additional 1 GB swap space.
Table 2-1 Cisco MGM Platform Requirements (continued)
Resource
Cisco MGM Server
Cisco MGM ClientSmall Installation Large Installation
Table 2-2 Cisco MGX 8000 Series Software Requirements for CMGM 2.0
PXM1 Release 1.1.40 VISM Release 2.2
RPM-PR Release 1.2.2
PXM1 Release 1.2.00 VISM Release 2.2
RPM-PR Release 1.2.2
PXM1 Release 1.2.10 VISM Release 3.0
VISM-PR Release 3.0
RPM-PR Release 1.2.2