Filter
Top Products
Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software
Configuration Examples for MPLS VPNs over IP Tunnels
MPC-293
Cisco IOS XR MPLS Configuration Guide
OL-12284-01
Configuration Examples for MPLS VPNs over IP Tunnels
This section provides the following examples:
• Configuring an L2TPv3 Tunnel: Example, page MPC-293
• Configuring the Global VRF Definition: Example, page MPC-293
• Configuring a Route-Policy Definition: Example, page MPC-293
• Configuring a Static Route: Example, page MPC-294
• Configuring an IPv4 Loopback Interface: Example, page MPC-294
• Configuring a CFI VRF Interface: Example, page MPC-294
Configuring an L2TPv3 Tunnel: Example
The following example shows how to configure an L2TPv3 tunnel:
tunnel-template t1
encapsulation l2tp
!
source Loopback0
!
Configuring the Global VRF Definition: Example
The following example shows how to configure an L2TPv3 tunnel:
vrf v1
address-family ipv4 unicast
import route-target
1:1
!
export route-target
1:1
!
address-family ipv6 unicast
import route-target
1:1
!
export route-target
1:1
!
Configuring a Route-Policy Definition: Example
The following example shows how to configure a route-policy definition:
configure
route-policy pass-all
pass
end-policy
!