Cisco Systems MWR 1941-DC-A Network Router User Manual


 
59
Cisco Regulatory Compliance and Safety Information for the Cisco MWR 1941-DC-A Mobile Wireless Edge Router
OL-7870-03
Telecom Approvals Listing
Telecom Approvals Listing
The Cisco MWR 1941-DC-A router meets the requirements listed in this section for telecommunications
equipment.
FCC Part 68 Notice
This equipment complies with Part 68 of the FCC rules. A label on the bottom of the chassis contains
the FCC registration number in the format US:5BIDDNAN0006. If requested, this information must be
provided to the telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not practical, the
telephone company will notify you as soon as possible. You will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
might affect the operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make the necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, please contact Cisco Systems for repair and warranty
information. If the problem is causing harm to the telephone network, the telephone company might
request that you remove the equipment from the network until the problem is resolved. All repairs should
be handled by authorized Cisco Systems service personnel.
Normally, this equipment will be used in conjunction with FCC-approved equipment that limits the
Encoded Analog Content that provides the required Billing Protection.
The facility interface and service order codes are shown in Table 3.
Cisco MWR 1941-DC-A routers (bearing labeling identification number (US:5B1DDNAN0165)
comply with the following requirements:
FCC Rules and Regulations 47 CFR Part 68
TIA/EIA/IS-968, Technical Criteria for Terminal Equipment to Prevent Harm to the Telephone
Network, July 2001, as adopted by the Administrative Council on Terminal Attachments (ACTA)
Table 3 Cisco MWR 1941-DC-A Router VWIC-2T1/E1-RAN Interface Card Facility Interface and
Service Order Codes
Model Name Facility Interface Code Service Order Code Jack Type
VWIC-2T1/E1-RAN 04DU9.BN, 04DU9.DN,
04DU9.1KN, 04DU9.1SN
6.0Y RJ48C