Filter
Top Products
Configuring the Network Storage System (NSS)
Step 3 — Use the Quick Setup Wizards to Configure the NSS
NSS2000 Getting Started Guide 13
3
STEP 5 It is a good idea to do a quick check of the information on the System Status page
to ensure that your hardware installation was successful and that this system is not
reporting any errors. For example, the Ethernet link is up and in good condition, the
right number of disk drives installed appear, and so on. For a detailed description
of the information on the System Status page, click the Help button in the upper-
right corner.
Step 3 — Use the Quick Setup Wizards to Configure the NSS
There are three wizards available from the Manager Menu of the configuration
interface:
• Initial Setup: This wizard automatically appears when you log into the
configuration interface for the first time. Although you can access it at any
time from the Manager Menu, if you have saved any configuration settings
before you run the wizard, note that running the wizard will erase any saved
data. For example, if you configure a RAID and then run the wizard, the RAID
will be deleted. This wizard steps you through the basic configuration to
create a RAID, volume, share, user, to set the Home Directory location, set
the time, and so on. (For detailed help on the full set of configuration options,