Filter
Top Products
5-7
Cisco Billing and Measurements Server User’s Guide
OL-3351-01
Chapter 5 Configuring BAMS for BAF Output
BAF Output Provisioning Example
prov-add:RATING-TYPE:orgzone=3,trmzone=13,ratetype=”INTRALATA”
prov-add:RATING-TYPE:orgzone=4,trmzone=14,ratetype=”INTERLATA”
prov-add:RATING-TYPE:orgzone=5,trmzone=15,ratetype=”INTERLATA”
prov-add:RATING-TYPE:orgzone=6,trmzone=16,ratetype=”FLAT”
prov-add:RATING-TYPE:orgzone=7,trmzone=17,ratetype=”FLAT”
prov-add:RATING-TYPE:orgzone=7,trmzone=18,ratetype=”FLAT”
prov-add:MSC-PARMS:type=”baf*bin”,polled=2,alarm=5,agealarm=5,agelevel=6,delage=5,delalarm
=6
prov-add:MSC-PARMS:type=”acc_h*”,polled=1,alarm=5,agealarm=5,agelevel=6,delage=5,delalarm=
6
prov-add:MSC-PARMS:type=”acc_d*”,polled=1,alarm=5,agealarm=99,agelevel=6,delage=99,
delalarm=6
prov-add:MSC-PARMS:type=”acc_r*”,polled=1,alarm=5,agealarm=5,agelevel=6,delage=5,delalarm=
6
prov-add:MSC-PARMS:type=”cdr*bin”,polled=1,alarm=5,agealarm=5,agelevel=6,delage=5,delalarm
=6
prov-add:MSC-PARMS:type=”*finished”,polled=1,alarm=5,agealarm=20,agelevel=6,delage=5,
delalarm=6
prov-add:MSC-PARMS:type=”elkup*”,polled=1,alarm=6,agealarm=5,agelevel=6,delage=5,delalarm=
6
prov-add:MSC-PARMS:type=”esyn*”,polled=1,alarm=6,agealarm=5,agelevel=6,delage=5,delalarm=6
prov-add:MSC-PARMS:type=”esem*”,polled=1,alarm=6,agealarm=5,agelevel=6,delage=5,delalarm=6
prov-add:MSC-PARMS:type=”ebaf*”,polled=1,alarm=6,agealarm=5,agelevel=6,delage=5,delalarm=6
prov-add:MSC-PARMS:type=”cdr*csv”,polled=2,alarm=5,agealarm=5,agelevel=6,delage=5,delalarm
=6
prov-add:MSC-PARMS:type=”baf*csv”,polled=2,alarm=5,agealarm=5,agelevel=6,delage=5,delalarm
=6
prov-add:MSC-THRES:interval=15,put=80,plt=60,uut=95,iut=50000,mil=80,mal=85,crl=90,key=1
prov-add:P01FILTER:answered=1,noanswer=1,busy=1,other=1
prov-add:SKIPCDB:id=1020
prov-add:NODEPARMS:activate=1,statoutput=0,bafoutput=1,asciibafoutput=1,asciioutput=0,
lookupinfo=1,bafinfo=1,dynamicaccumes=0,sup-zero-counts=0,interval-minutes=15,
nailed-cfg=0,p01output=0,p01prefix="p01_",enable-h323=0,extasciioutput=0,nicsoutput=0
prov-add:TOLLFREE:digits=1800
prov-add:TOLLFREE:digits=800
prov-add:TOLLFREE:digits=1888
prov-add:TOLLFREE:digits=888
prov-add:TOLLFREE:digits=1877
prov-add:TOLLFREE:digits=877
prov-dply::
Bulk Provisioning
You accomplish bulk provisioning by preparing a batch file that contains the correct sequence of
provisioning commands. The command-line instruction to execute the bulk-provisioning batch file is as
follows:
mml -b filename containing commands [-o outputfilename]
BAMS does not monitor each command’s execution status, but the results are placed in the MML session
log file. You specify the log filename (that is, outputfilename) with the -o parameter, as shown above.
Note The batch file must begin with a prov-sta command and end with a prov-dply command. These
commands denote the beginning and the end of the provisioning session.
The following is an example of a batch file named mml.script:
set-node:2:
prov-sta::srcver=new,dstver=sample,confirm