Filter
Top Products
Chapter 4 Zone Configuration
Basic Zone Configuration
4-6
Cisco Traffic Anomaly Detector User Guide
OL-6109-01
Where:
–
template-name—A zone template. Options include:
Default —The Guard default zone template
LINK_128K—A template designed for bandwidth-limited Links
LINK_1M—A template designed for bandwidth-limited Links
LINK_4M—A template designed for bandwidth-limited Links
LINK_512K— A template designed for bandwidth-limited Links
Note If no template name is specified, the list of zone templates is
displayed.
2. Choose ENTER. The following sample screen appears:
admin@DETECTOR-conf# show templates DEFAULT
Zone is INACTIVE
Operation Mode: AUTOMATIC
Description:
Zone ID: 0
Template: DEFAULT
PROTECT IP STATE: all-zone
FLEX-FILTER:
FLEX-FILTER ACTION: disable
admin@DETECTOR-conf#
Entering a Zone Command Level
The user should enter a zone command level to perform zone specific operations
and procedures.
To enter a zone command level perform the following:
1. From the Configuration command group level type the following:
admin@DETECTOR-conf# zone <zone-name>
Or alternatively:
From the Global command group level type the following:
admin@DETECTOR# configure <zone-name>