Filter
Top Products
Chapter 8 Working with Linksets
Viewing Real-Time Data for a Linkset
8-28
Cisco Signaling Gateway Manager User Guide
OL-7064-01
For each linkset, the Linkset Details: Linkset Access Lists section displays the
following information:
Viewing Real-Time Data for a Linkset
SGM enables you to view detailed statistics for a selected linkset, including its
associated links, status, and other information. Detailed information for the
selected linkset is displayed in the left column, and for the adjacent linkset in the
right column.
To display detailed statistics for a linkset, select Linksets in the left pane of the
SGM Main Window, right-click a linkset in the right pane, then select View >
Real-Time Data and Charts in the right-click menu. SGM displays the Statistics
Details Window for a Linkset.
Updates for the linksets that are received from the SGM server are reflected
automatically in this window.
Changes you make in this window might not be reflected throughout SGM until
the next poll (by default, every 15 seconds). For information about changing the
poll interval, see the “Linkset Statistics Details: Poll Settings” section on
page 8-29.
Column Description
Poll Interval Poll interval used to collect data for the table.
Last Poll Time the last poll was run.
This field initially displays the phrase Polling device. After the first polling cycle,
SGM populates this field with the actual time of the last poll.
Linkset Name of the linkset for which access lists are being displayed.
In Inbound access lists for the linkset. If the linkset has no inbound access lists, this
field displays None.
Out Outbound access lists for the linkset. If the linkset has no outbound access lists, this
field displays None.
List # Access list number configured on the node and applied to the linkset. ITP uses
access list numbers 2700 through 2799.
Access List List of commands in the access list.