Filter
Top Products
Installing the Camera Software
Setting Up the Wireless Connection on the WVC2300 Camera
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 28
5
Setting Up the Wireless Connection on the WVC2300 Camera
To configure the WVC2300 camera for wireless connectivity, follow these steps:
STEP 1 Click Setup in the toolbar to open the Setup > Basic Setup
window.
STEP 2 Enter the appropriate Wireless Settings:
• SSID—The SSID is the network name shared among all devices in a
wireless network. Enter the network’s SSID or network name here. The
SSID is case sensitive. Default is ciscosb.
• Security—Click Edit Security Settings to display the Wireless Security
window.
STEP 3 From the Wireless Security window, select the drop-down list from Security Mode
to select the appropriate option based on your wireless network configuration:
- Disabled—No security is implemented on your wireless network. Data
is not encrypted before transmission.
- WEP—WEP is a basic encryption method that is not as secure as later
methods such as WPA-Personal or WPA2 Personal. However, it is
supported by all clients.
- WPA /WPA2 Personal—Offers two encryption methods, TKIP and AES,
with dynamic encryption keys.
- WPA /WPA2 Enterprise—Requires that your LAN has a RADIUS server
for authentication.
The following describes the settings for each Security Mode option.
WEP
• TX Key—Select the number of the key used for the wireless network.
• WEP Encryption—Select the appropriate option for key length based on
your network settings.
• Passphrase—Type in the passphrase used to generate WEP keys for your
network and click Generate.
• Key 1-4—Key values can be entered in manually or generated from a
passphrase.