Filter
Top Products
xxxii
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
OL-13644-01
About This Guide
Cisco MGX 8800/8900 Series Software Configuration Guide,
Release 5.5.00
Describes how to configure the Cisco MGX 8880 Media
Gateway. Also describes how to configure Cisco MGX 8850
(PXM1E), Cisco MGX 8850 (PXM45), the Cisco MGX
8850/B (PXM1E/PXM45), and Cisco MGX 8830 switches to
operate as ATM edge switches and the Cisco MGX 8950
switch to operate as a core switch. This guide also provides
some operation and maintenance procedures.
Cisco MGX 8800/8900 Series Command Reference, Release
5.2
Describes the PXM commands that are available in the CLI
of the Cisco MGX 8850 (PXM45), Cisco MGX 8850
(PXM1E), Cisco MGX 8950, and Cisco MGX 8830 switches.
Also describes the PXM commands that are available in the
CLI of the Cisco MGX 8880 Media Gateway.
Cisco MGX 8850 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811223=
Provides installation instructions for the Cisco MGX 8850
(PXM1) edge concentrator.
Cisco MGX 8850 Multiservice Switch Overview, Release 1.1.3 Describes the system components and function of the
Cisco MGX 8850 (PXM1) edge concentrator.
Cisco MGX and Service Expansion Shelf Error Messages,
Release 5.2
Provides error message descriptions and recovery
procedures.
Cisco MGX Route Processor Module (RPM-XF) Installation
and Configuration Guide, Release 5.5
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM-XF) in the Cisco MGX 8850
(PXM45), Cisco MGX 8880 (PXM45), and Cisco MGX 8950
switch. Also provides site preparation procedures,
troubleshooting procedures, maintenance procedures, cable
and connector specifications, and basic Cisco IOS
configuration information.
Cisco MGX Route Processor Module (RPM-PR) Installation
and Configuration Guide, Release 5.2
Describes how to install and configure the Cisco MGX Route
Processor Module (RPM/B or RPM-PR) in the
Cisco MGX 8850 (PXM1), the Cisco MGX 8250, and the
Cisco MGX 8230 edge concentrators. Also provides site
preparation procedures, troubleshooting procedures,
maintenance procedures, cable and connector specifications,
and basic Cisco IOS configuration information.
Cisco PNNI Network Planning Guide for MGX and SES
Products
Provides guidelines for planning a PNNI network that uses
Cisco MGX 8830, Cisco MGX 8850 (PXM45 and PXM1E),
Cisco MGX 8950, or Cisco BPX 8600 switches or the
MGX 8880 Media Gateway. When connected to a PNNI
network, each Cisco BPX 8600 Series switch requires an SES
for PNNI route processing.
Cisco Service Expansion Shelf Hardware Installation Guide,
Release 1
DOC-786122=
Provides instructions for installing and maintaining an SES
controller.
Cisco SES PNNI Controller Command Reference, Release 3
DOC-7814260=
Describes the commands used to configure and operate the
SES PNNI controller.
Table 4 Descriptions of Technical Manuals and Release Notes for Cisco Multiservice Switch Products (continued)
Document Title Description