Filter
Top Products
xxiii
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
OL-13644-01
About This Guide
• Finding Cisco User Documentation Online—This document explains how to find documentation for
MGX, BPX, and SES multiservice switches and media gateways as well as CWM network
management software. These documents are available only online.
• Installation Warning Card—This document provides precautions about installing your cards. It
explains such subjects as removing the shipping tab and inserting cards properly into the correct
slots.
Step 2 Refer to the release notes for your product.
Step 3 If your network uses the CWM network management system, upgrade CWM. (If you are going to install
CWM for the first time, do so after Step 4.) Upgrade instructions are included in the following
documents:
• Cisco WAN Manager Installation Guide, 15.4.00
• Cisco WAN Manager User Guide, 15.4.00
Step 4 If your network contains MGX and SES products, refer to this manual for planning information:
• Cisco PNNI Network Planning Guide for MGX and SES Products
Step 5 Refer to these manuals for information about installing cards and cables in the MGX chassis:
• Cisco MGX 8800/8900 Hardware Installation Guide, Releases 2 - 5.2 for installing cards and cables
in these chassis.
• Cisco MGX 8xxx Edge Concentrator Installation and Configuration Guide for installing cards and
cables in the Cisco MGX 8230, Cisco MGX 8250, or Cisco MGX 8850 (PXM1) chassis.
Step 6 Refer to the manuals that help you configure your MGX switch and processor cards:
• Cisco MGX 8800/8900 Series Software Configuration Guide, Release 5.5.00.00 for these chassis.
• Cisco MGX 8xxx Edge Concentrator Installation and Configuration Guide for the Cisco MGX 8230,
Cisco MGX 8250, or Cisco MGX 8850 (PXM1) chassis.
Step 7 Refer to the manual that supports the additional cards you intend to install in your switch. For example:
• The services books can help you establish ATM, Frame Relay, or circuit emulation services on your
switch.
• The VISM book can help you set up your switch as a voice gateway, and the RPM book can help
you implement IP on the switch.
Step 8 Additional books, such as command reference guides and error message books, can help with the daily
operation and maintenance of your switch.
Note Manual titles may be different for earlier software releases. The titles shown in Table 2 are for the
November 2008 release.
Technical Manual Titles and Descriptions
Table 2 lists the technical manuals and release notes that support the November 2008 multiservice switch
product releases. Books and release notes in Table 2 are listed in order of use and include information
about which multiservice switch or media gateway the document supports.