Filter
Top Products
Implementing SBC Redundancy (High Availability)
Additional References
SBC-117
Cisco IOS XR Session Border Controller Configuration Guide
Deleting the SBC Redundancy: Example
The following example shows how to delete the SBC configuration created in the “Configuring an SBC
Redundancy: Example” section:
1. Delete the SBC redundancy:
config
sbc umsbc-node5
service-location preferred-active 0/2/CPU0
commit
exit
2. Delete the SBC virtual interface redundancy:
config
interface sbc1
service-location preferred-active 0/2/CPU0
commit
3. Verify the SBC redundancy deletion:
RP/0/1/CPU0:node5#show service redundancy
Service type Name Pref. Active Pref. Standby
--------------------------------------------------------------------------------
SBC umsbc-node5 0/2/CPU0 Active
Additional References
The following sections provide references related to implementing SBC redundancy (high availability).
Related Documents
Standards
Related Topic Document Title
Cisco IOS XR master command reference Cisco IOS XR Master Commands List
Cisco IOS XR SBC interface configuration commands Cisco IOS XR Session Border Controller Command Reference
Initial system bootup and configuration information for a router
using the Cisco IOS XR Software
Cisco IOS XR Getting Started Guide
Cisco IOS XR command modes Cisco IOS XR Command Mode Reference
Standards Title
No new or modified standards are supported by this feature, and
support from existing standards has not been modified by this
feature.
—