Filter
Top Products
Implementing SBC Redundancy (High Availability)
Related Command Summary
SBC-118
Cisco IOS XR Session Border Controller Configuration Guide
MIBs
RFCs
Technical Assistance
Related Command Summary
This section provides an alphabetical list of the commands related to redundancy configuration on the
Cisco XR 12000 Series Router. For more information about the commands, see the Cisco IOS XR Session
Border Controller Command Reference.
MIBs MIBs Link
The SBC MIB is not supported for Release 3.3.0. To locate and download MIBs for selected platforms using Cisco
IOS XR software, use the Cisco MIB Locator found at the
following URL:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
RFCs Title
No new or modified RFCs are supported by this feature, and
support for existing RFCs has not been modified by this feature.
—
Description Link
The Cisco Technical Support website contains thousands of
pages of searchable technical content, including links to
products, technologies, solutions, technical tips, and tools.
Registered Cisco.com users can log in from this page to access
even more content.
http://www.cisco.com/techsupport
Command Purpose
service-location preferred-active node-id
preferred-standby node-id
Enables a service card to run SBC function as a primary, and
optionally, secondary location.
interface sbcnumber Enters the mode of an SBC interface, creating it if necessary.
The number argument must be a value between 1 and 2000.
show services redundancy Shows the redundancies running on the system.