Filter
Top Products
19
NOTE: The fc-lunid field displays the LUN ID of the ITL that you will configure. For
non-sequential LUNs, this value will always appear as 00:00:00:00:00:00:00:00. For sequential
LUNs, the value will iterate by 1 for each LUN in the target device.
11. Enter the
no fc srp itl
command with
• the GUID of the host
• the GUID extension of the host
• the WWPN of the target (from step 10)
• the LUN ID of the storage disk (from step 10)
• the
lun-policy
keyword
• the
restricted
keyword
to configure the ITL through LUN masking.
Example
12. Enter the
no fc srp it
command with
• the GUID of the host
• the GUID extension of the host
• the WWPN of the target
• the
gateway-portmask-policy
keyword
• the restricted keyword
• the all keyword or the ports you want to unmask
to grant the initiator portmask-policy access to the target.
Example
13. Enter the
no fc srp itl
command with
• the GUID of the host
• the GUID extension of the host
• the WWPN of the target
• the LUN ID of the storage disk
• the
gateway-portmask-policy
keyword
• the restricted keyword
• the all keyword or the ports you want to unmask
to grant the initiator portmask-policy access to the LUN.
Example
14. Enter the
/etc/init.d/ts_srp start
command at the host.
Topspin-90(config)# no fc srp itl 00:05:ad:00:00:01:29:c5
00:00:00:00:00:00:00:00 21:00:00:04:cf:f6:c2:ab 00:00:00:00:00:00:00:00
lun-policy restricted
Topspin-90(config)# no fc srp it 00:05:ad:00:00:01:29:c5 00:00:00:00:00:00:00:00
21:00:00:04:cf:f6:c2:ab gateway-portmask-policy restricted all
Topspin-90(config)# no fc srp itl 00:05:ad:00:00:01:29:c5
00:00:00:00:00:00:00:00: 21:00:00:04:cf:f6:c2:ab 00:00:00:00:00:00:00:00
gateway-portmask-policy restricted all