Filter
Top Products
14
To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port,
then pull the latch away from the port with your other hand and gently wiggle the connector away from
the port.
Figure 1-12: Removing a Pull Connector
Install the Element Manager (GUI)
1. Verify that you have sufficient system resources:
• 32 MB free RAM
• 50 MB disk space + 50MB additional temporary space during installation
• 300 Mhz processor
• 800x600 screen resolution, 16bit color depth
2. Insert the Topspin CD-ROM into the CD-ROM drive of a server or workstation that has network
access to a Topspin management port.
1. push connector toward port
2. pull latch away from port
3. pull connector away from port