Filter
Top Products
Implementing NTP on Cisco IOS XR Software
How to Implement NTP on Cisco IOS XR Software
SMC-181
Cisco IOS XR System Management Configuration Guide
Step 3
no interface
type instance
or
interface
type instance
disable
Example:
RP/0/RP0/CPU0:router(config-ntp)# no interface
pos 0/0/0/1
or
RP/0/RP0/CPU0:router(config-ntp)# interface POS
0/0/0/1 disable
Disables NTP services on the specified interface.
Step 4
end
or
commit
Example:
RP/0/RP0/CPU0:router(config)# end
or
RP/0/RP0/CPU0:router(config)# commit
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
–
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
–
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Command or Action Purpose