Filter
Top Products
2-27
Cisco ICM Enterprise Edition SS7 Gateway Configuration Tool User Guide Release 6.0(0)
Chapter 2 Using SS7Cfg to Configure Your Gateway
Working in the Main Window
This process signifies that outbound SCCP messages with a called number string
beginning with “011” will be routed to PC 200 as a primary destination, and all
other messages will be routed to PC 201 as a secondary destination.
Now that the SCCP layer has been configured, the session layer needs to be
configured.
Configuring the Session Layer
The Session layer controls the interface between the ICM NIC and the gateway.
During this part of the process, the local TCP/IP address and port will be
configured, along with its node. These settings must match what is configured at
the Network Interface Controller (NIC) to allow the NIC and the gateway to
communicate.
For more information about the NIC, see the Cisco Network Applications
Manager (NAM) Setup and Configuration guide and the Cisco ICM Software
Installation Guide.