Filter
Top Products
3
Installing and Upgrading Cisco Video Surveillance Media Server (VSMS)
Installation Notes
–
ATI or Nvidia DirectX 9 compatible graphics interface. The graphics
interface and Drivers must support DirectX Acceleration, Direct3D
Acceleration, and AGP texture acceleration and have at least 128 MB of
video memory.
• Operating system:
–
Microsoft Windows XP SP2 (32-bit)
• Software:
–
Microsoft Internet Explorer 6.0
–
Microsoft DirectX 9.0c
Installation Notes
• The Pegasus MJPEG video decoder is installed automatically with the VSMS
client.
• Cisco recommends that you use NTP source to maintain the correct time on
the server. Configuring NTP should be done before video recording is
configured. The hardware clock should be set to use UTC time and the
appropriate time zone for the server. If you are using SUSE, you can use YaST
to configure the server time.
• The performance of client devices can vary depending on client configuration
and applications.
Obtaining VSMS Software
The VSMS software is available from
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=281550158
You must log in to the Cisco website to access the software. Select the Cisco
Video Surveillance Media Server Software software version for the appropriate
for your Linux version.