Filter
Top Products
8
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Cable Interface Card for the Cisco uBR10012 Router
OL-2872-02
Cisco uBR10-LCP2-MC16C/MC16E/MC16S Overview
Figure 6 shows the faceplate for the Cisco uBR10-LCP2-MC16S cable interface line card.
Figure 6 Cisco uBR10-LCP2-MC16S Faceplate
The Cisco uBR10-LCP2-MC16S cable interface line card has one downstream port and six upstream
ports. The upstream ports are labeled US0 through US5. The downstream port is labeled DS. There are
six LEDs labeled MGR ACT (manager active) next to each upstream port. See Table 3 for a description
of the LCP2 adapter card LEDs and Table 4 on page 8 for descriptions of the cable interface line card
LEDs and their functions.
Cisco uBR10-LCP2-MC16x LEDs
Both the Cisco uBR10-LCP2 adapter card and the cable interface line card have their own set of status
LEDs on the front of the module. The Cisco uBR10-LCP2 adapter card LEDs are described in Table 3.
The Cisco uBR-MC16x cable interface line cards LEDs are described in Table 4 on page 8
.
Table 3 describes the LCP2 adapter card LEDs and their functions.
Table 4 on page 8 describes the cable interface line card LEDs and their functions.
62827
MGR
ACT
US0
MGR
ACT
US1
MGR
ACT
US2
MGR
ACT
US3
MGR
ACT
US4
MGR
ACT
US5
DS
uBR - MC16S
+42 dBmV
ENABLED
Table 3 Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED Status Description
Power Green
Off
Indicates that the power is being supplied to the Cisco uBR10-LCP2.
Power is off.
Status
Status LED on N+1 or
redundant card in chassis
Yellow
Green
Blinking Green
Indicates that the Cisco uBR10-LCP2 is in the boot up process, is in self
test mode, or is downloading code.
Indicates that the Cisco uBR10-LCP2 has successfully completed the
boot, the self test, and the code download process.
Indicates that the board is in standby or protect card mode.
Maintenance Off
Yellow
Normally off to indicate that there is no maintenance action required.
Indicates that it is safe to remove the entire assembly (Cisco uBR10-LCP2
adapter card and Cisco uBR-MC16x cable interface line card) from the
chassis.
Table 4 Cisco uBR-MC16x Cable Interface Line Card LEDs and Their Functions
LED Status Description
Enables Green
Off
Cable interface line card is operating normally, is receiving DC power from the router
midplane, and is configured for operation.
Either the card is shut down or the slot is not working.
Upstream Green
Off
Upstream path is enabled and configured (each upstream port).
Either the port is not properly configured or is shut down, or the slot is not working.