Filter
Top Products
21
Installing the Cisco WAE Inline Network Adapter
OL-12480-03
Installing Adapters in the WAE-7326 Appliance
Completing the Installation
To complete your installation, reinstall the cover, and reconnect all cables that you disconnected earlier.
Caution To maintain proper cooling and airflow, install the cover before turning on the appliance. Operating the
appliance for extended periods (over 30 minutes) with the cover removed might damage internal
components.
To install the cover, follow these steps:
Step 1 Place the cover release latch (labeled 1 in Figure 14) in the open (up) position.
Step 2 Insert the bottom tabs of the top cover into the matching slots in the device chassis.
Step 3 Press down on the cover release latch to lock the cover in place.
Figure 14 Installing the Cover
Step 4
Install the appliance in the rack.
Step 5 Connect all external cables and the power cord to the appliance, and then plug the power cord into a
properly grounded electrical outlet.
159947
1