Filter
Top Products
2
Installing the Cisco WAE Inline Network Adapter
OL-12480-03
Product Overview
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Product Overview
This section contains the following topics:
• Inline Network Adapter Description
• Ports and LED Indicators
• Adapter Specifications
Note The minimum software release required for the inline network adapter is WAAS 4.0.7.
Inline Network Adapter Description
The WAE appliance supports one optional 4-port Ethernet inline network adapter. The inline network
adapter is a full-height, three-quarter-length PCI-X network interface card that contains four
independent Gigabit Ethernet ports. (See Figure 1.)
Figure 1 Inline Network Adapter
The Cisco WAE inline network adapter provides an inline traffic interception capability for your
appliance. When you configure the WAE appliance for inline interception mode, you can set attributes
to control which interfaces are to be used over which VLANs. By default, the adapter operates on all
inline-capable interfaces and VLANs. You can configure the inline redirection feature using the WAAS
4.0.7 CLI or the WAAS 4.0.7 Central Manager GUI.
159701