Filter
Top Products
Chapter 3
Advanced Configuration
4
Wireless-N PCI Adapter with Dual-Band
To connect to a wireless network, go to How to Connect to
a Wireless Network, page 4. To disconnect from a wireless
network, select the network, and click Disconnect. To
refresh the list of available networks, click Search Again.
How to Connect to a Wireless Network
Follow these instructions to connect to a wireless network
that has not been saved. (To connect to a saved network,
go to How to Connect to a Saved Network, page 8.)
On the 1. Connect to a Wireless Network screen, locate the
name of your wireless network in the list. If your wireless
network is not in the list, go to How to Connect to a
Hidden Wireless Network, page 5.
If your wireless network supports Wi-Fi Protected 2.
Setup (the icon appears next to the network’s
name), go to How to Connect Using Wi-Fi Protected
Setup, page 6.
Select your network, and then click 3. Connect.
Select a Wireless Network
If the wireless network uses wireless security, enter the 4.
security key. Click Next.
Enter Wireless Network’s Security Key
The 5. Checking Connection screen appears while the
Wireless Manager establishes the wireless connection.
When it is finished, click Next.
Checking Connection
The 6. Connected to Your Network screen appears. To
save your network’s settings, select Remember this
network. (Saving a network’s settings will make it
easier to reconnect
to the network.)
Click Finish to exit
the Wireless Manager.
Connected to Your Network
Congratulations! The Adapter is connected to
the network.