Filter
Top Products
Chapter 1 Setup
15
2 Part Names and Functions
Front view
(1) Cover
Opens to allow loading of the media and
ribbon.
(2) Control panel
To set the printer configuration settings. (See
Chapter 2.)
(3) Ribbon holder
To attach the ribbon. (See Chapter 3.)
(4) Ribbon winder
To wind the ribbon after printing.
(See Chapter 3.)
(5) Roll holder
Holds the roll of media.
(6) Roll guide
Guides the roll of media. This is adjusted
according to the width of the media. (See
Chapter 3.)
(7) Media holder
Holds the roll holder. (See Chapter 3.)
(8) Open lever
To swing the printhead out of the way when
loading the media or cleaning the printhead.
(See Chapter 3.)
(9) Printhead pressure adjustment knob
(See Chapter 4.)
(10) Open guide
Holds down the media. The adjustable,
movable media sensor inside (available for
the model CLP-7201e) detects the media
position. (See Chapter 3.)
(11) Open guide lever
Pressing this opens the open guide to
replace the media. (See Chapter 3.)
(12) Front sensors
Detect the label or tag position. (See
Chapter 3.)
(13) Offset check window
Allows you to check the optimum position of
the printhead. (See Chapter 4.)
2 Part Names and Function
s