Filter
Top Products
— 15 —
3. PREPARATION
3.1
Connecting the AC Adapter and AC Power Cord
1. Tu rn off the printer power.
2. Plug in the cable connector of the AC adapter to the power connector at the
rear of the printer.
3. Connect the AC power cord to the inlet of AC adapter, and insert the AC power-
cord plug into a suitable wall outlet.
CAUTION!
● Use only the specified AC adapter with the printer.
● When disconnecting a cable, do not pull out by the cable. Always hold the plug.
● Always keep the AC power supply away from other noise generating equipment.
● Do not pull the power cord. Otherwise fire, electric shock, or power disconnection
may result.
● If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise
fire or electric shock may result.
● Keep the power cord away from heat generating appliances. Otherwise the shield of
power cord may be fused resulting in a fire or electric shock.
● If the printer will not be used for a long time, leave it disconnected from its supply
outlet.
● Lay the cable not to be caught by the leg or the like.
AC power cord
Inlet
Cable connector
AC adapter