Filter
Top Products
— 13 —
Feature Parameters
Serial interface Speed: 1200, 2400, 4800, 9600, 19200, 57600,
115200 bps
Interface: Bidirectional serial communication
Signal level: RS-232C
Data lenght: 8 bits
Start bit: 1 bit
Stop bit: 1 bit
Parity: None
Flow control: Xon/Xoff
Connector: Motorola Star Tac
Input buffer 64 KB
Mag stripe reader Track 1, 2, 3
LED color Power LED: GREEN and RED
Charge LED: GREEN and RED
Operation switches Power switch 1, LF switch 1
Sensors and error monitoring Paper end sensor, Open cover sensor,
Head temperature, Low battery
Power consumption Idle - approximately 2W
When printing - approximately 15W
Battery Battery type: Li-ion battery pack
Cell Voltage: 3.7 V
Number of cells: 2
Battery pack voltage: 7.4 V
Battery pack capacity: 2000 mAh
Battery charging time Approximately 3 hours by main unit + AC adapter
Maximum lines printed with 40,000 lines
fully charged battery (At temperature 20°C, standard setting, alphanumeric
slide pattern printing. The number of lines may be
changed by such condition as temperature, etc.)
Power supply monitoring Auto Power OFF (programmable - from 1 to 60 min.)
Low battery monitoring included.
AC Adapter Model: 10AD-JU (for Japan, USA, and Canada)
10AD-E (Europe)
Input voltage 90 V - 264 V AC
Output voltage 9.0 V DC 1.0 A
Operating Environment Temperature: 5 – 40°C
Humidity: 35 – 80% RH (No dew condensation)
Storage Environment Temperature: –20 – 60°C
Humidity: 10 – 90% RH (No dew condensation)