Filter
Top Products
— 29 —
6. LIST OF COMMANDS
1 BEL Sound the buzzer
2 HT Horizontal tab command
3 LF Printing and paper feed
4 CR Print command
5 ESC RS Sounds the buzzer
6 ESC SP Setting the right space amount of the character
7 ESC $ Specifying the absolute positions
8 ESC % Selecting user character set
9 ESC & Define user characters
10 ESC ! Collective specifying printing mode
11 ESC * Specifying the bit image mode
12 ESC + Switch OFF the printer
13 ESC – Specifying/canceling underline
14 ESC . Self test/demo print
15 ESC 2 Specifying 1/6-inch line feed rate
16 ESC 3 Setting line feed rate of minimum pitch
17 ESC = Data input control
18 ESC ? Mag stripe reader settings
19 ESC @ Initializing the printer
20 ESC D Setting horizontal tab position
21 ESC E Specifying/canceling highlighting
22 ESC G ESC G Specifying/canceling double printing
23 ESC J Printing and feeding paper
24 ESC R Selecting code table
25 ESC S Setting Baud rate for the serial port
26 ESC T Printing diagnostic information
27 ESC V Specifying/canceling 90°-right- turned characters
28 ESC Y Selecting intensity level
29 ESC Z Returning diagnostic information
30 ESC \ Specifying the relative positions
31 ESC _ Setting the printer in default state
32 ESC ' Reading battery voltage and thermal head
temperature
33 ESC a Aligning the characters
*
*
*
*
*
*
*
*
*
*
*
*