Filter
Top Products
VMA6593 5
The [PICTURE] button accesses the display adjustment
menus. Each time this button is pressed, the unit will step to
the next setting mode, and the screen will display the value of
the selected setting. These adjustment settings are:
Brightness
Contrast
Color
Tint
Mem Reset (resets above to original values)
Change the value of each setting by pressing the [+] and [-]
buttons. Each setting has 42 steps of adjustment range.
6.5 INCH WIDE LCD MONITOR
(+) and (-)
adjustment keys
PICTURE
BRIGHTNESS
6.5 INCH WIDE LCD MONITOR
(+) and (-)
adjustment keys
PICTURE
CONTRAST
6.5 INCH WIDE LCD MONITOR
(+) and (-)
adjustment keys
PICTURE
COLOR
6.5 INCH WIDE LCD MONITOR
(+) and (-)
adjustment keys
PICTURE
TINT
6.5 INCH WIDE LCD MONITOR
(+) and (-)
adjustment keys
PICTURE
MEM RESET
Note:
• When the “MEM RESET” option is displayed on the screen,
pressing either the [+] or [-] buttons will reset all settings to
their original factory values. If you do not wish to reset the
settings, either press the [PICTURE] button again, or wait for the
monitor to exit the picture adjustment mode automatically.
Note:
• If the “MEM RESET” option is used and the VMA6593 is set to
Source 2, the monitor will revert to the default setting of Source 1.
If there is no active input on Source 1, the screen may go dark. If
this happens, press the [SOURCE] button to switch the monitor
back to Source 2.
The IR Receiver detects the signals from infrared remote
controls that are included with optional Clarion video source
units. Aim remote controls at this IR receiver during use.
Note:
• The IR Receiver only functions with select Clarion multimedia
equipment.
VMA 6593 122302.p65 12/23/02, 10:36 PM5