Filter
Top Products
VMA6593 9
Custom Mounting using the threaded insert
The base of the VMA6593 has a threaded insert (1/4 - 20).
This insert can be used with the optional Clarion ZMT009
gooseneck mounting kit or with a 1/4 -20 machine screw in
custom applications.
5. Wiring the VMA6593
The following pages display wiring diagrams for various
VMA6593 configurations.
Read the following precautions before wiring your system.
• Disconnect the negative battery terminal before making
any wiring connections.
• Be particularly careful where you route wires. Keep them
away from the engine, exhaust system, etc. Heat may
damage wires.
• If the fuse should blow, make sure all connections are
correct and no wires are damaged before replacing the
fuse. Always use fuses that are the same amperage value
as the original. When replacing a fuse, never let the battery
side touch any metal part or any other wire.
WARNING!
Be sure to disconnect the battery (-)
terminal before starting. This is to
prevent short circuits during installation.
VMA 6593 122302.p65 12/23/02, 10:36 PM9