Filter
Top Products
Getting Started
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
5
4. Once the Wizard has found the drivers, click Next to start the installation.
5. During the installation, a Digital Signature Not Found window might open.
Click Ye s to continue.
6. When installation is complete, click Finish to close the Found New Hardware
Wizard.
There are three separate components that will be installed through the Found New
Hardware Wizard. Do not restart your computer until all three have been installed.
Getting Started
4
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Installing USB drivers
Before you can use your FlexCam USB, you must install the proper USB drivers on
your PC or Mac.The drivers are found on the USB Software and Driver Disk that
came with your FlexCam USB.
To install USB drivers on a PC
1. Insert the USB Software and Driver Disk into the CD-ROM drive.
2. Plug in the FlexCam USB.The Found New Hardware Wizard will open.
3. Select Search for a suitable driver for my device (recommended).
4. Select CD-ROM drives.
Getting Started
Figure 2. Found New Hardware Wizard
Figure 3. Locate Driver Files
Figure 4. Driver Files Search Results
Figure 5. Completed driver installation