Filter
Top Products
Operating Instructions
3. CONVOTHERM PC-Control
page 10
10 July 2006 CONVOTHERM PC-Control
3.5 Other Functions
3.5.1 Changing the Pre-programmed Values in the PC-Control Program
1. Click Options.
2. Click Pre-programmed values.
3. Scroll through the values and change with the arrow keys, or enter new values as needed.
4. Click OK or Cancel to quit without saving.
Notes:
• By pressing the Standard button, all the Pre-programmed values are reset to their
factory default values without warning.
• The Auto/Memo values in the individual Combis do not change and the Pre-programmed
values do not affect the Auto/Memo values in the Combis.
3.5.2 Enable or Disable Controls on a Combi
Disable
:
1. Click Options.
2. Click Locking out control panel.
3. Click the controls to be disabled. The disabled controls turn grey with grey symbols and
a yellow key.
4. Select the Combis to be locked out in the Status / Device-name field.
5. Click Lock to confirm or click Cancel to quit without saving.
Enable
:
The controls can be enabled again by clicking Unlock.
3.5.3 Send a Cookbook by e-Mail
If your PC has a modem and an Internet connection, you can use the e-Mail function to
send your Cookbook to other people or to receive one from them.
1. Click File.
2. Click e-Mail.
3. Refer to your e-mail program to insert and send PrgData.prg.
4. To send the Notes by e-mail, insert the file PrgData.menu into the e-mail.
5. Follow the program directions to send the files.