Filter
Top Products
(B) Peer to Peer - This mode allows wireless-equipped computers to communicate directly with
each other. No access point is used.
Transfer Rate: Select the speed you want to use in the drop-down manual of the Transfer Rate
3. The Profile Settings screen will appear now after filling in the information. If you choose “Access
Point Mode”, go to Step 4 now. If you choose “Peer to Peer” Mode, select the correct settings as in
the below page. Click the “Next” button, and go to next page. Click the “Back” button if you need to
change any settings.
Network Name- Fill the SSID of the wireless network
Transfer Rate- Select the speed you want to use in the drop-down manual of the Transfer Rate
Channel - The channel you choose should match the channel set on the other devices in your wireless
network.