Filter
Top Products
United States January 2, 2003
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Removing the Keyboard
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
To remove the
keyboard, complete
the following steps:
1.
Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touch pad.
3. Gently lift up the
front of the keyboard
and disconnect the
flex cable from the
ZIF connector on the
system board.
NOTE:
To remove a
cable from a
ZIF connector,
lift both
corners of the
ZIF connector
and slide
simultaneously
with constant
light force.
Then remove
the cable.
Refer to the
section on
Cables and
Connectors for
more
information on
removing a
cable from the
ZIF connector.
Next Step
privacy statement
legal notices