Filter
Top Products
United States January 2, 2003
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Removing the Battery Charger Board
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
To remove the
battery charger
board, complete
the following
steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touch pad.
3. Remove the
keyboard.
4. Remove the
hard drive.
5. Remove the
stiffener
bracket.
6. Remove
screw from the
battery charger
board, unplug
the board from
the connector
on the system
board, and lift
out of the
chassis.
To replace the
battery charger
board, reverse
the previous
procedures.
NOTE:
When
replacing
the
battery
charger
board,
ensure
the pins
are
aligned
with the
connector
on the
system
board.
privacy statement
legal notices